10. How to set up the Technisat/B2C2 Flexcop devices¶
注釈
This documentation is outdated.
Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009
10.1. Find out what device you have¶
Important Notice: The driver does NOT support Technisat USB 2 devices!
First start your linux box with a shipped kernel:
lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
Technisat SkyStar2 DVB card (rev 02)
dmesg | grep frontend may show you for example:
DVB: registering frontend 0 (Conexant CX24123/CX24109)...
10.2. Kernel compilation:¶
If the Flexcop / Technisat is the only DVB / TV / Radio device in your box get rid of unnecessary modules and check this one:
Multimedia support
=> Customise analog and hybrid tuner modules to build
In this directory uncheck every driver which is activated there
(except Simple tuner support
for ATSC 3rd generation only -> see case 9 please).
Then please activate:
Main module part:
Multimedia support
=>DVB/ATSC adapters
=>Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters
=>
Technisat/B2C2 Air/Sky/Cable2PC PCI
(PCI card) or=>
Technisat/B2C2 Air/Sky/Cable2PC USB
(USB 1.1 adapter) and for troubleshooting purposes:=>
Enable debug for the B2C2 FlexCop drivers
Frontend / Tuner / Demodulator module part:
Multimedia support
=>DVB/ATSC adapters
=>
Customise the frontend modules to build
Customise DVB frontends
=>
SkyStar DVB-S Revision 2.3:
=>
Zarlink VP310/MT312/ZL10313 based
=>
Generic I2C PLL based tuners
SkyStar DVB-S Revision 2.6:
=>
ST STV0299 based
=>
Generic I2C PLL based tuners
SkyStar DVB-S Revision 2.7:
=>
Samsung S5H1420 based
=>
Integrant ITD1000 Zero IF tuner for DVB-S/DSS
=>
ISL6421 SEC controller
SkyStar DVB-S Revision 2.8:
=>
Conexant CX24123 based
=>
Conexant CX24113/CX24128 tuner for DVB-S/DSS
=>
ISL6421 SEC controller
AirStar DVB-T card:
=>
Zarlink MT352 based
=>
Generic I2C PLL based tuners
CableStar DVB-C card:
=>
ST STV0297 based
=>
Generic I2C PLL based tuners
AirStar ATSC card 1st generation:
=>
Broadcom BCM3510
AirStar ATSC card 2nd generation:
=>
NxtWave Communications NXT2002/NXT2004 based
=>
Generic I2C PLL based tuners
AirStar ATSC card 3rd generation:
=>
LG Electronics LGDT3302/LGDT3303 based
Multimedia support
=>Customise analog and hybrid tuner modules to build
=>Simple tuner support