2.9. ioctls CEC_G_MODE and CEC_S_MODE¶
CEC_G_MODE, CEC_S_MODE - Get or set exclusive use of the CEC adapter
2.9.1. Synopsis¶
-
int
ioctl(int fd, CEC_G_MODE, __u32 *argp)¶
-
int
ioctl(int fd, CEC_S_MODE, __u32 *argp)¶
2.9.3. Description¶
By default any filehandle can use ioctls CEC_RECEIVE and CEC_TRANSMIT, but in order to prevent applications from stepping on each others toes it must be possible to obtain exclusive access to the CEC adapter. This ioctl sets the filehandle to initiator and/or follower mode which can be exclusive depending on the chosen mode. The initiator is the filehandle that is used to initiate messages, i.e. it commands other CEC devices. The follower is the filehandle that receives messages sent to the CEC adapter and processes them. The same filehandle can be both initiator and follower, or this role can be taken by two different filehandles.
When a CEC message is received, then the CEC framework will decide how it will be processed. If the message is a reply to an earlier transmitted message, then the reply is sent back to the filehandle that is waiting for it. In addition the CEC framework will process it.
If the message is not a reply, then the CEC framework will process it first. If there is no follower, then the message is just discarded and a feature abort is sent back to the initiator if the framework couldn't process it. If there is a follower, then the message is passed on to the follower who will use ioctl CEC_RECEIVE to dequeue the new message. The framework expects the follower to make the right decisions.
The CEC framework will process core messages unless requested otherwise by the follower. The follower can enable the passthrough mode. In that case, the CEC framework will pass on most core messages without processing them and the follower will have to implement those messages. There are some messages that the core will always process, regardless of the passthrough mode. See Core Message Processing for details.
If there is no initiator, then any CEC filehandle can use ioctl CEC_TRANSMIT. If there is an exclusive initiator then only that initiator can call ioctls CEC_RECEIVE and CEC_TRANSMIT. The follower can of course always call ioctl CEC_TRANSMIT.
Available initiator modes are:
|
0x0 |
This is not an initiator, i.e. it cannot transmit CEC messages or make any other changes to the CEC adapter. |
|
0x1 |
This is an initiator (the default when the device is opened) and it can transmit CEC messages and make changes to the CEC adapter, unless there is an exclusive initiator. |
|
0x2 |
This is an exclusive initiator and this file descriptor is the
only one that can transmit CEC messages and make changes to the
CEC adapter. If someone else is already the exclusive initiator
then an attempt to become one will return the |
Available follower modes are:
|
0x00 |
This is not a follower (the default when the device is opened). |
|
0x10 |
This is a follower and it will receive CEC messages unless there
is an exclusive follower. You cannot become a follower if
CEC_CAP_TRANSMIT is not set or if CEC_MODE_NO_INITIATOR
was specified, the |
|
0x20 |
This is an exclusive follower and only this file descriptor will
receive CEC messages for processing. If someone else is already
the exclusive follower then an attempt to become one will return
the |
|
0x30 |
This is an exclusive follower and only this file descriptor will
receive CEC messages for processing. In addition it will put the
CEC device into passthrough mode, allowing the exclusive follower
to handle most core messages instead of relying on the CEC
framework for that. If someone else is already the exclusive
follower then an attempt to become one will return the |
|
0xd0 |
Put the file descriptor into pin monitoring mode. Can only be used in
combination with CEC_MODE_NO_INITIATOR,
otherwise the |
|
0xe0 |
Put the file descriptor into monitor mode. Can only be used in
combination with CEC_MODE_NO_INITIATOR,i
otherwise the |
|
0xf0 |
Put the file descriptor into 'monitor all' mode. Can only be used
in combination with CEC_MODE_NO_INITIATOR, otherwise
the |
Core message processing details:
|
The core will return the CEC version that was set with ioctl CEC_ADAP_S_LOG_ADDRS, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead. |
|
The core will return the vendor ID that was set with ioctl CEC_ADAP_S_LOG_ADDRS, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead. |
|
The core will return a Feature Abort message with reason 'Feature Refused' as per the specification, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead. |
|
The core will report the current physical address, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead. |
|
The core will report the current OSD name that was set with ioctl CEC_ADAP_S_LOG_ADDRS, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead. |
|
The core will do nothing if the CEC version is older than 2.0, otherwise it will report the current features that were set with ioctl CEC_ADAP_S_LOG_ADDRS, except when in passthrough mode. In passthrough mode the core does nothing (for any CEC version) and this message has to be handled by a follower instead. |
|
If CEC_CAP_RC is set and if CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU is set, then generate a remote control key press. This message is always passed on to the follower(s). |
|
If CEC_CAP_RC is set and if CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU is set, then generate a remote control key release. This message is always passed on to the follower(s). |
|
The CEC framework will make note of the reported physical address and then just pass the message on to the follower(s). |
2.9.4. Return Value¶
On success 0 is returned, on error -1 and the errno variable is set
appropriately. The generic error codes are described at the
Generic Error Codes chapter.
The ioctl CEC_S_MODE can return the following error codes:
- EINVAL
The requested mode is invalid.
- EPERM
Monitor mode is requested, but the process does have the
CAP_NET_ADMINcapability.- EBUSY
Someone else is already an exclusive follower or initiator.