3.4. Streaming I/O (DMA buffer importing)

The DMABUF framework provides a generic method for sharing buffers between multiple devices. Device drivers that support DMABUF can export a DMA buffer to userspace as a file descriptor (known as the exporter role), import a DMA buffer from userspace using a file descriptor previously exported for a different or the same device (known as the importer role), or both. This section describes the DMABUF importer role API in V4L2.

Refer to DMABUF exporting for details about exporting V4L2 buffers as DMABUF file descriptors.

Input and output devices support the streaming I/O method when the V4L2_CAP_STREAMING flag in the capabilities field of struct v4l2_capability returned by the VIDIOC_QUERYCAP ioctl is set. Whether importing DMA buffers through DMABUF file descriptors is supported is determined by calling the VIDIOC_REQBUFS ioctl with the memory type set to V4L2_MEMORY_DMABUF.

This I/O method is dedicated to sharing DMA buffers between different devices, which may be V4L devices or other video-related devices (e.g. DRM). Buffers (planes) are allocated by a driver on behalf of an application. Next, these buffers are exported to the application as file descriptors using an API which is specific for an allocator driver. Only such file descriptor are exchanged. The descriptors and meta-information are passed in struct v4l2_buffer (or in struct v4l2_plane in the multi-planar API case). The driver must be switched into DMABUF I/O mode by calling the VIDIOC_REQBUFS with the desired buffer type.

3.4.1. Example: Initiating streaming I/O with DMABUF file descriptors

struct v4l2_requestbuffers reqbuf;

memset(&reqbuf, 0, sizeof (reqbuf));
reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
reqbuf.memory = V4L2_MEMORY_DMABUF;
reqbuf.count = 1;

if (ioctl(fd, VIDIOC_REQBUFS, &reqbuf) == -1) {
    if (errno == EINVAL)
        printf("Video capturing or DMABUF streaming is not supported\\n");
    else
        perror("VIDIOC_REQBUFS");

    exit(EXIT_FAILURE);
}

The buffer (plane) file descriptor is passed on the fly with the VIDIOC_QBUF ioctl. In case of multiplanar buffers, every plane can be associated with a different DMABUF descriptor. Although buffers are commonly cycled, applications can pass a different DMABUF descriptor at each VIDIOC_QBUF call.

3.4.2. Example: Queueing DMABUF using single plane API

int buffer_queue(int v4lfd, int index, int dmafd)
{
    struct v4l2_buffer buf;

    memset(&buf, 0, sizeof buf);
    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
    buf.memory = V4L2_MEMORY_DMABUF;
    buf.index = index;
    buf.m.fd = dmafd;

    if (ioctl(v4lfd, VIDIOC_QBUF, &buf) == -1) {
        perror("VIDIOC_QBUF");
        return -1;
    }

    return 0;
}

3.4.3. Example 3.6. Queueing DMABUF using multi plane API

int buffer_queue_mp(int v4lfd, int index, int dmafd[], int n_planes)
{
    struct v4l2_buffer buf;
    struct v4l2_plane planes[VIDEO_MAX_PLANES];
    int i;

    memset(&buf, 0, sizeof buf);
    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
    buf.memory = V4L2_MEMORY_DMABUF;
    buf.index = index;
    buf.m.planes = planes;
    buf.length = n_planes;

    memset(&planes, 0, sizeof planes);

    for (i = 0; i < n_planes; ++i)
        buf.m.planes[i].m.fd = dmafd[i];

    if (ioctl(v4lfd, VIDIOC_QBUF, &buf) == -1) {
        perror("VIDIOC_QBUF");
        return -1;
    }

    return 0;
}

Captured or displayed buffers are dequeued with the VIDIOC_DQBUF ioctl. The driver can unlock the buffer at any time between the completion of the DMA and this ioctl. The memory is also unlocked when VIDIOC_STREAMOFF is called, VIDIOC_REQBUFS, or when the device is closed.

For capturing applications it is customary to enqueue a number of empty buffers, to start capturing and enter the read loop. Here the application waits until a filled buffer can be dequeued, and re-enqueues the buffer when the data is no longer needed. Output applications fill and enqueue buffers, when enough buffers are stacked up output is started. In the write loop, when the application runs out of free buffers it must wait until an empty buffer can be dequeued and reused. Two methods exist to suspend execution of the application until one or more buffers can be dequeued. By default VIDIOC_DQBUF blocks when no buffer is in the outgoing queue. When the O_NONBLOCK flag was given to the open() function, VIDIOC_DQBUF returns immediately with an EAGAIN error code when no buffer is available. The select() and poll() functions are always available.

To start and stop capturing or displaying applications call the VIDIOC_STREAMON and VIDIOC_STREAMOFF ioctls.

注釈

VIDIOC_STREAMOFF removes all buffers from both queues and unlocks all buffers as a side effect. Since there is no notion of doing anything "now" on a multitasking system, if an application needs to synchronize with another event it should examine the struct v4l2_buffer timestamp of captured or outputted buffers.

Drivers implementing DMABUF importing I/O must support the VIDIOC_REQBUFS, VIDIOC_QBUF, VIDIOC_DQBUF, VIDIOC_STREAMON and VIDIOC_STREAMOFF ioctls, and the select() and poll() functions.