7.18. ioctl VIDIOC_ENUMINPUT¶
7.18.1. Name¶
VIDIOC_ENUMINPUT - Enumerate video inputs
7.18.2. Synopsis¶
-
int
ioctl
(int fd, VIDIOC_ENUMINPUT, struct v4l2_input *argp)¶
7.18.3. Arguments¶
fd
File descriptor returned by open().
argp
Pointer to struct
v4l2_input
.
7.18.4. Description¶
To query the attributes of a video input applications initialize the
index
field of struct v4l2_input
and call the
ioctl VIDIOC_ENUMINPUT with a pointer to this structure. Drivers
fill the rest of the structure or return an EINVAL
error code when the
index is out of bounds. To enumerate all inputs applications shall begin
at index zero, incrementing by one until the driver returns EINVAL
.
-
v4l2_input
¶
__u32 |
|
Identifies the input, set by the application. |
__u8 |
|
Name of the video input, a NUL-terminated ASCII string, for example: "Vin (Composite 2)". This information is intended for the user, preferably the connector label on the device itself. |
__u32 |
|
Type of the input, see Input Types. |
__u32 |
|
Drivers can enumerate up to 32 video and audio inputs. This field shows which audio inputs were selectable as audio source if this was the currently selected video input. It is a bit mask. The LSB corresponds to audio input 0, the MSB to input 31. Any number of bits can be set, or none. When the driver does not enumerate audio inputs no bits must be set. Applications shall not interpret this as lack of audio support. Some drivers automatically select audio sources and do not enumerate them since there is no choice anyway. For details on audio inputs and how to select the current input see Audio Inputs and Outputs. |
__u32 |
|
Capture devices can have zero or more tuners (RF demodulators).
When the |
|
Every video input supports one or more different video standards. This field is a set of all supported standards. For details on video standards and how to switch see Video Standards. |
|
__u32 |
|
This field provides status information about the input. See
Input Status Flags for flags. With the exception of the sensor
orientation bits |
__u32 |
|
This field provides capabilities for the input. See Input capabilities for flags. |
__u32 |
|
Reserved for future extensions. Drivers must set the array to zero. |
|
1 |
This input uses a tuner (RF demodulator). |
|
2 |
Any non-tuner video input, for example Composite Video,
S-Video, HDMI, camera sensor. The naming as |
|
3 |
This input is a touch device for capturing raw touch data. |
General |
||
|
0x00000001 |
Attached device is off. |
|
0x00000002 |
|
|
0x00000004 |
The hardware supports color decoding, but does not detect color modulation in the signal. |
Sensor Orientation |
||
|
0x00000010 |
The input is connected to a device that produces a signal that is flipped horizontally and does not correct this before passing the signal to userspace. |
|
0x00000020 |
The input is connected to a device that produces a signal that is flipped vertically and does not correct this before passing the signal to userspace. .. note:: A 180 degree rotation is the same as HFLIP | VFLIP |
Analog Video |
||
|
0x00000100 |
No horizontal sync lock. |
|
0x00000200 |
A color killer circuit automatically disables color decoding when it detects no color modulation. When this flag is set the color killer is enabled and has shut off color decoding. |
|
0x00000400 |
No vertical sync lock. |
|
0x00000800 |
No standard format lock in case of auto-detection format by the component. |
Digital Video |
||
|
0x00010000 |
No synchronization lock. |
|
0x00020000 |
No equalizer lock. |
|
0x00040000 |
Carrier recovery failed. |
VCR and Set-Top Box |
||
|
0x01000000 |
Macrovision is an analog copy prevention system mangling the video signal to confuse video recorders. When this flag is set Macrovision has been detected. |
|
0x02000000 |
Conditional access denied. |
|
0x04000000 |
VTR time constant. [?] |
|
0x00000002 |
This input supports setting video timings by using
|
|
0x00000004 |
This input supports setting the TV standard by using
|
|
0x00000008 |
This input supports setting the native size using the
|
7.18.5. Return Value¶
On success 0 is returned, on error -1 and the errno
variable is set
appropriately. The generic error codes are described at the
Generic Error Codes chapter.
- EINVAL
The struct
v4l2_input
index
is out of bounds.