29. The saa7134 driver¶
Author Gerd Hoffmann
This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV boards. See http://www.semiconductors.philips.com/pip/saa7134hl for a description.
Almost everything is working. video, sound, tuner, radio, mpeg ts, ...
As with bttv, card-specific tweaks are needed. Check CARDLIST for a list of known TV cards and saa7134-cards.c for the drivers card configuration info.
Pick up videodev + v4l2 patches from http://bytesex.org/patches/. Configure, build, install + boot the new kernel. You'll need at least these config options:
Type "make" to build the driver now. "make install" installs the driver. "modprobe saa7134" should load it. Depending on the card you might have to pass card=<nr> as insmod option, check CARDLIST for valid choices.
29.3. Changes / Fixes¶
Please mail me unified diffs ("diff -u") with your changes, and don't forget to tell me what it changes / which problem it fixes / whatever it is good for ...
29.4. Known Problems¶
The tuner for the flyvideos isn't detected automatically and the default might not work for you depending on which version you have. There is a tuner= insmod option to override the driver's default.
29.5. Card Variations:¶
Cards can use either of these two crystals (xtal):
32.11 MHz -> .audio_clock=0x187de7
24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600)
Some details about 30/34/35:
saa7130 - low-price chip, doesn't have mute, that is why all those cards should have .mute field defined in their tuner structure.
saa7134 - usual chip
saa7133/35 - saa7135 is probably a marketing decision, since all those chips identifies itself as 33 on pci.
29.6. LifeView GPIOs¶
This section was authored by: Peter Missel <email@example.com>
LifeView FlyTV Platinum FM (LR214WF)
GP27 MDT2005 PB4 pin 10
GP26 MDT2005 PB3 pin 9
GP25 MDT2005 PB2 pin 8
GP23 MDT2005 PB1 pin 7
GP22 MDT2005 PB0 pin 6
GP21 MDT2005 PB5 pin 11
GP20 MDT2005 PB6 pin 12
GP19 MDT2005 PB7 pin 13
nc MDT2005 PA3 pin 2
Remote MDT2005 PA2 pin 1
GP18 MDT2005 PA1 pin 18
nc MDT2005 PA0 pin 17 strap low
GP17 Strap "GP7"=High
GP16 Strap "GP6"=High
Drives SA630D ENCH1 and HEF4052 A1 pinsto do FM radio through SIF input
GP12 Strap "GP5" = High
GP11 Strap "GP4" = High
GP10 Strap "GP3" = High
GP09 Strap "GP2" = Low
GP08 Strap "GP1" = Low