Kernel driver nct7904

Supported chip:

  • Nuvoton NCT7904D

    Prefix: nct7904

    Addresses: I2C 0x2d, 0x2e

    Datasheet: Publicly available at Nuvoton website

Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>

Description

The NCT7904D is a hardware monitor supporting up to 20 voltage sensors, internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature interface, up to 12 fan tachometer inputs, up to 4 fan control channels with SmartFan.

Sysfs entries

Currently, the driver supports only the following features:

in[1-20]_input

Input voltage measurements (mV)

fan[1-12]_input

Fan tachometer measurements (rpm)

temp1_input

Local temperature (1/1000 degree, 0.125 degree resolution)

temp[2-9]_input

CPU temperatures (1/1000 degree, 0.125 degree resolution)

pwm[1-4]_enable

R/W, 1/2 for manual or SmartFan mode Setting SmartFan mode is supported only if it has been previously configured by BIOS (or configuration EEPROM)

pwm[1-4]

R/O in SmartFan mode, R/W in manual control mode

The driver checks sensor control registers and does not export the sensors that are not enabled. Anyway, a sensor that is enabled may actually be not connected and thus provide zero readings.

Limitations

The following features are not supported in current version:

  • SmartFan control

  • Watchdog

  • GPIO

  • external temperature sensors

  • SMI

  • min/max values

  • many other...