Summary of CDROM ioctl calls

November, 2004

This document attempts to describe the ioctl(2) calls supported by the CDROM layer. These are by-and-large implemented (as of Linux 2.6) in drivers/cdrom/cdrom.c and drivers/block/scsi_ioctl.c

ioctl values are listed in <linux/cdrom.h>. As of this writing, they are as follows:

CDROMPAUSE

Pause Audio Operation

CDROMRESUME

Resume paused Audio Operation

CDROMPLAYMSF

Play Audio MSF (struct cdrom_msf)

CDROMPLAYTRKIND

Play Audio Track/index (struct cdrom_ti)

CDROMREADTOCHDR

Read TOC header (struct cdrom_tochdr)

CDROMREADTOCENTRY

Read TOC entry (struct cdrom_tocentry)

CDROMSTOP

Stop the cdrom drive

CDROMSTART

Start the cdrom drive

CDROMEJECT

Ejects the cdrom media

CDROMVOLCTRL

Control output volume (struct cdrom_volctrl)

CDROMSUBCHNL

Read subchannel data (struct cdrom_subchnl)

CDROMREADMODE2

Read CDROM mode 2 data (2336 Bytes) (struct cdrom_read)

CDROMREADMODE1

Read CDROM mode 1 data (2048 Bytes) (struct cdrom_read)

CDROMREADAUDIO

(struct cdrom_read_audio)

CDROMEJECT_SW

enable(1)/disable(0) auto-ejecting

CDROMMULTISESSION

Obtain the start-of-last-session address of multi session disks (struct cdrom_multisession)

CDROM_GET_MCN

Obtain the "Universal Product Code" if available (struct cdrom_mcn)

CDROM_GET_UPC

Deprecated, use CDROM_GET_MCN instead.

CDROMRESET

hard-reset the drive

CDROMVOLREAD

Get the drive's volume setting (struct cdrom_volctrl)

CDROMREADRAW

read data in raw mode (2352 Bytes) (struct cdrom_read)

CDROMREADCOOKED

read data in cooked mode

CDROMSEEK

seek msf address

CDROMPLAYBLK

scsi-cd only, (struct cdrom_blk)

CDROMREADALL

read all 2646 bytes

CDROMGETSPINDOWN

return 4-bit spindown value

CDROMSETSPINDOWN

set 4-bit spindown value

CDROMCLOSETRAY

pendant of CDROMEJECT

CDROM_SET_OPTIONS

Set behavior options

CDROM_CLEAR_OPTIONS

Clear behavior options

CDROM_SELECT_SPEED

Set the CD-ROM speed

CDROM_SELECT_DISC

Select disc (for juke-boxes)

CDROM_MEDIA_CHANGED

Check is media changed

CDROM_DRIVE_STATUS

Get tray position, etc.

CDROM_DISC_STATUS

Get disc type, etc.

CDROM_CHANGER_NSLOTS

Get number of slots

CDROM_LOCKDOOR

lock or unlock door

CDROM_DEBUG

Turn debug messages on/off

CDROM_GET_CAPABILITY

get capabilities

CDROMAUDIOBUFSIZ

set the audio buffer size

DVD_READ_STRUCT

Read structure

DVD_WRITE_STRUCT

Write structure

DVD_AUTH

Authentication

CDROM_SEND_PACKET

send a packet to the drive

CDROM_NEXT_WRITABLE

get next writable block

CDROM_LAST_WRITTEN

get last block written on disc

The information that follows was determined from reading kernel source code. It is likely that some corrections will be made over time.


General:

Unless otherwise specified, all ioctl calls return 0 on success and -1 with errno set to an appropriate value on error. (Some ioctls return non-negative data values.)

Unless otherwise specified, all ioctl calls return -1 and set errno to EFAULT on a failed attempt to copy data to or from user address space.

Individual drivers may return error codes not listed here.

Unless otherwise specified, all data structures and constants are defined in <linux/cdrom.h>


CDROMPAUSE

Pause Audio Operation

usage:

ioctl(fd, CDROMPAUSE, 0);
inputs:

none

outputs:

none

error return:
  • ENOSYS cd drive not audio-capable.

CDROMRESUME

Resume paused Audio Operation

usage:

ioctl(fd, CDROMRESUME, 0);
inputs:

none

outputs:

none

error return:
  • ENOSYS cd drive not audio-capable.

CDROMPLAYMSF

Play Audio MSF

(struct cdrom_msf)

usage:

struct cdrom_msf msf;

ioctl(fd, CDROMPLAYMSF, &msf);
inputs:

cdrom_msf structure, describing a segment of music to play

outputs:

none

error return:
  • ENOSYS cd drive not audio-capable.

notes:
  • MSF stands for minutes-seconds-frames

  • LBA stands for logical block address

  • Segment is described as start and end times, where each time is described as minutes:seconds:frames. A frame is 1/75 of a second.

CDROMPLAYTRKIND

Play Audio Track/index

(struct cdrom_ti)

usage:

struct cdrom_ti ti;

ioctl(fd, CDROMPLAYTRKIND, &ti);
inputs:

cdrom_ti structure, describing a segment of music to play

outputs:

none

error return:
  • ENOSYS cd drive not audio-capable.

notes:
  • Segment is described as start and end times, where each time is described as a track and an index.

CDROMREADTOCHDR

Read TOC header

(struct cdrom_tochdr)

usage:

cdrom_tochdr header;

ioctl(fd, CDROMREADTOCHDR, &header);
inputs:

cdrom_tochdr structure

outputs:

cdrom_tochdr structure

error return:
  • ENOSYS cd drive not audio-capable.

CDROMREADTOCENTRY

Read TOC entry

(struct cdrom_tocentry)

usage:

struct cdrom_tocentry entry;

ioctl(fd, CDROMREADTOCENTRY, &entry);
inputs:

cdrom_tocentry structure

outputs:

cdrom_tocentry structure

error return:
  • ENOSYS cd drive not audio-capable.

  • EINVAL entry.cdte_format not CDROM_MSF or CDROM_LBA

  • EINVAL requested track out of bounds

  • EIO I/O error reading TOC

notes:
  • TOC stands for Table Of Contents

  • MSF stands for minutes-seconds-frames

  • LBA stands for logical block address

CDROMSTOP

Stop the cdrom drive

usage:

ioctl(fd, CDROMSTOP, 0);
inputs:

none

outputs:

none

error return:
  • ENOSYS cd drive not audio-capable.

notes:
  • Exact interpretation of this ioctl depends on the device, but most seem to spin the drive down.

CDROMSTART

Start the cdrom drive

usage:

ioctl(fd, CDROMSTART, 0);
inputs:

none

outputs:

none

error return:
  • ENOSYS cd drive not audio-capable.

notes:
  • Exact interpretation of this ioctl depends on the device, but most seem to spin the drive up and/or close the tray. Other devices ignore the ioctl completely.

CDROMEJECT
  • Ejects the cdrom media

usage:

ioctl(fd, CDROMEJECT, 0);
inputs:

none

outputs:

none

error returns:
  • ENOSYS cd drive not capable of ejecting

  • EBUSY other processes are accessing drive, or door is locked

notes:
  • See CDROM_LOCKDOOR, below.

CDROMCLOSETRAY

pendant of CDROMEJECT

usage:

ioctl(fd, CDROMCLOSETRAY, 0);
inputs:

none

outputs:

none

error returns:
  • ENOSYS cd drive not capable of closing the tray

  • EBUSY other processes are accessing drive, or door is locked

notes:
  • See CDROM_LOCKDOOR, below.

CDROMVOLCTRL

Control output volume (struct cdrom_volctrl)

usage:

struct cdrom_volctrl volume;

ioctl(fd, CDROMVOLCTRL, &volume);
inputs:

cdrom_volctrl structure containing volumes for up to 4 channels.

outputs:

none

error return:
  • ENOSYS cd drive not audio-capable.

CDROMVOLREAD

Get the drive's volume setting

(struct cdrom_volctrl)

usage:

struct cdrom_volctrl volume;

ioctl(fd, CDROMVOLREAD, &volume);
inputs:

none

outputs:

The current volume settings.

error return:
  • ENOSYS cd drive not audio-capable.

CDROMSUBCHNL

Read subchannel data

(struct cdrom_subchnl)

usage:

struct cdrom_subchnl q;

ioctl(fd, CDROMSUBCHNL, &q);
inputs:

cdrom_subchnl structure

outputs:

cdrom_subchnl structure

error return:
  • ENOSYS cd drive not audio-capable.

  • EINVAL format not CDROM_MSF or CDROM_LBA

notes:
  • Format is converted to CDROM_MSF or CDROM_LBA as per user request on return

CDROMREADRAW

read data in raw mode (2352 Bytes)

(struct cdrom_read)

usage:

union {

  struct cdrom_msf msf;               /* input */
  char buffer[CD_FRAMESIZE_RAW];      /* return */
} arg;
ioctl(fd, CDROMREADRAW, &arg);
inputs:

cdrom_msf structure indicating an address to read.

Only the start values are significant.

outputs:

Data written to address provided by user.

error return:
  • EINVAL address less than 0, or msf less than 0:2:0

  • ENOMEM out of memory

notes:
  • As of 2.6.8.1, comments in <linux/cdrom.h> indicate that this ioctl accepts a cdrom_read structure, but actual source code reads a cdrom_msf structure and writes a buffer of data to the same address.

  • MSF values are converted to LBA values via this formula:

    lba = (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
    
CDROMREADMODE1

Read CDROM mode 1 data (2048 Bytes)

(struct cdrom_read)

notes:

Identical to CDROMREADRAW except that block size is CD_FRAMESIZE (2048) bytes

CDROMREADMODE2

Read CDROM mode 2 data (2336 Bytes)

(struct cdrom_read)

notes:

Identical to CDROMREADRAW except that block size is CD_FRAMESIZE_RAW0 (2336) bytes

CDROMREADAUDIO

(struct cdrom_read_audio)

usage:

struct cdrom_read_audio ra;

ioctl(fd, CDROMREADAUDIO, &ra);
inputs:

cdrom_read_audio structure containing read start point and length

outputs:

audio data, returned to buffer indicated by ra

error return:
  • EINVAL format not CDROM_MSF or CDROM_LBA

  • EINVAL nframes not in range [1 75]

  • ENXIO drive has no queue (probably means invalid fd)

  • ENOMEM out of memory

CDROMEJECT_SW

enable(1)/disable(0) auto-ejecting

usage:

int val;

ioctl(fd, CDROMEJECT_SW, val);
inputs:

Flag specifying auto-eject flag.

outputs:

none

error return:
  • ENOSYS Drive is not capable of ejecting.

  • EBUSY Door is locked

CDROMMULTISESSION

Obtain the start-of-last-session address of multi session disks

(struct cdrom_multisession)

usage:

struct cdrom_multisession ms_info;

ioctl(fd, CDROMMULTISESSION, &ms_info);
inputs:

cdrom_multisession structure containing desired

format.

outputs:

cdrom_multisession structure is filled with last_session information.

error return:
  • EINVAL format not CDROM_MSF or CDROM_LBA

CDROM_GET_MCN

Obtain the "Universal Product Code" if available

(struct cdrom_mcn)

usage:

struct cdrom_mcn mcn;

ioctl(fd, CDROM_GET_MCN, &mcn);
inputs:

none

outputs:

Universal Product Code

error return:
  • ENOSYS Drive is not capable of reading MCN data.

notes:
  • Source code comments state:

    The following function is implemented, although very few
    audio discs give Universal Product Code information, which
    should just be the Medium Catalog Number on the box.  Note,
    that the way the code is written on the CD is /not/ uniform
    across all discs!
    
CDROM_GET_UPC

CDROM_GET_MCN (deprecated)

Not implemented, as of 2.6.8.1

CDROMRESET

hard-reset the drive

usage:

ioctl(fd, CDROMRESET, 0);
inputs:

none

outputs:

none

error return:
  • EACCES Access denied: requires CAP_SYS_ADMIN

  • ENOSYS Drive is not capable of resetting.

CDROMREADCOOKED

read data in cooked mode

usage:

u8 buffer[CD_FRAMESIZE]

ioctl(fd, CDROMREADCOOKED, buffer);
inputs:

none

outputs:

2048 bytes of data, "cooked" mode.

notes:

Not implemented on all drives.

CDROMREADALL

read all 2646 bytes

Same as CDROMREADCOOKED, but reads 2646 bytes.

CDROMSEEK

seek msf address

usage:

struct cdrom_msf msf;

ioctl(fd, CDROMSEEK, &msf);
inputs:

MSF address to seek to.

outputs:

none

CDROMPLAYBLK

scsi-cd only

(struct cdrom_blk)

usage:

struct cdrom_blk blk;

ioctl(fd, CDROMPLAYBLK, &blk);
inputs:

Region to play

outputs:

none

CDROMGETSPINDOWN

usage:

char spindown;

ioctl(fd, CDROMGETSPINDOWN, &spindown);
inputs:

none

outputs:

The value of the current 4-bit spindown value.

CDROMSETSPINDOWN

usage:

char spindown

ioctl(fd, CDROMSETSPINDOWN, &spindown);
inputs:

4-bit value used to control spindown (TODO: more detail here)

outputs:

none

CDROM_SET_OPTIONS

Set behavior options

usage:

int options;

ioctl(fd, CDROM_SET_OPTIONS, options);
inputs:

New values for drive options. The logical 'or' of:

CDO_AUTO_CLOSE

close tray on first open(2)

CDO_AUTO_EJECT

open tray on last release

CDO_USE_FFLAGS

use O_NONBLOCK information on open

CDO_LOCK

lock tray on open files

CDO_CHECK_TYPE

check type on open for data

outputs:

Returns the resulting options settings in the ioctl return value. Returns -1 on error.

error return:
  • ENOSYS selected option(s) not supported by drive.

CDROM_CLEAR_OPTIONS

Clear behavior options

Same as CDROM_SET_OPTIONS, except that selected options are turned off.

CDROM_SELECT_SPEED

Set the CD-ROM speed

usage:

int speed;

ioctl(fd, CDROM_SELECT_SPEED, speed);
inputs:

New drive speed.

outputs:

none

error return:
  • ENOSYS speed selection not supported by drive.

CDROM_SELECT_DISC

Select disc (for juke-boxes)

usage:

int disk;

ioctl(fd, CDROM_SELECT_DISC, disk);
inputs:

Disk to load into drive.

outputs:

none

error return:
  • EINVAL Disk number beyond capacity of drive

CDROM_MEDIA_CHANGED

Check is media changed

usage:

int slot;

ioctl(fd, CDROM_MEDIA_CHANGED, slot);
inputs:

Slot number to be tested, always zero except for jukeboxes.

May also be special values CDSL_NONE or CDSL_CURRENT

outputs:

Ioctl return value is 0 or 1 depending on whether the media

has been changed, or -1 on error.

error returns:
  • ENOSYS Drive can't detect media change

  • EINVAL Slot number beyond capacity of drive

  • ENOMEM Out of memory

CDROM_DRIVE_STATUS

Get tray position, etc.

usage:

int slot;

ioctl(fd, CDROM_DRIVE_STATUS, slot);
inputs:

Slot number to be tested, always zero except for jukeboxes.

May also be special values CDSL_NONE or CDSL_CURRENT

outputs:

Ioctl return value will be one of the following values

from <linux/cdrom.h>:

CDS_NO_INFO

Information not available.

CDS_NO_DISC

CDS_TRAY_OPEN

CDS_DRIVE_NOT_READY

CDS_DISC_OK

-1

error

error returns:
  • ENOSYS Drive can't detect drive status

  • EINVAL Slot number beyond capacity of drive

  • ENOMEM Out of memory

CDROM_DISC_STATUS

Get disc type, etc.

usage:

ioctl(fd, CDROM_DISC_STATUS, 0);
inputs:

none

outputs:

Ioctl return value will be one of the following values

from <linux/cdrom.h>:

  • CDS_NO_INFO

  • CDS_AUDIO

  • CDS_MIXED

  • CDS_XA_2_2

  • CDS_XA_2_1

  • CDS_DATA_1

error returns:

none at present

notes:
  • Source code comments state:

    Ok, this is where problems start.  The current interface for
    the CDROM_DISC_STATUS ioctl is flawed.  It makes the false
    assumption that CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.
    Unfortunately, while this is often the case, it is also
    very common for CDs to have some tracks with data, and some
    tracks with audio.      Just because I feel like it, I declare
    the following to be the best way to cope.  If the CD has
    ANY data tracks on it, it will be returned as a data CD.
    If it has any XA tracks, I will return it as that.      Now I
    could simplify this interface by combining these returns with
    the above, but this more clearly demonstrates the problem
    with the current interface.  Too bad this wasn't designed
    to use bitmasks...             -Erik
    
    Well, now we have the option CDS_MIXED: a mixed-type CD.
    User level programmers might feel the ioctl is not very
    useful.
                    ---david
    
CDROM_CHANGER_NSLOTS

Get number of slots

usage:

ioctl(fd, CDROM_CHANGER_NSLOTS, 0);
inputs:

none

outputs:

The ioctl return value will be the number of slots in a CD changer. Typically 1 for non-multi-disk devices.

error returns:

none

CDROM_LOCKDOOR

lock or unlock door

usage:

int lock;

ioctl(fd, CDROM_LOCKDOOR, lock);
inputs:

Door lock flag, 1=lock, 0=unlock

outputs:

none

error returns:
  • EDRIVE_CANT_DO_THIS

    Door lock function not supported.

  • EBUSY

    Attempt to unlock when multiple users have the drive open and not CAP_SYS_ADMIN

notes:

As of 2.6.8.1, the lock flag is a global lock, meaning that all CD drives will be locked or unlocked together. This is probably a bug.

The EDRIVE_CANT_DO_THIS value is defined in <linux/cdrom.h> and is currently (2.6.8.1) the same as EOPNOTSUPP

CDROM_DEBUG

Turn debug messages on/off

usage:

int debug;

ioctl(fd, CDROM_DEBUG, debug);
inputs:

Cdrom debug flag, 0=disable, 1=enable

outputs:

The ioctl return value will be the new debug flag.

error return:
  • EACCES Access denied: requires CAP_SYS_ADMIN

CDROM_GET_CAPABILITY

get capabilities

usage:

ioctl(fd, CDROM_GET_CAPABILITY, 0);
inputs:

none

outputs:

The ioctl return value is the current device capability flags. See CDC_CLOSE_TRAY, CDC_OPEN_TRAY, etc.

CDROMAUDIOBUFSIZ

set the audio buffer size

usage:

int arg;

ioctl(fd, CDROMAUDIOBUFSIZ, val);
inputs:

New audio buffer size

outputs:

The ioctl return value is the new audio buffer size, or -1 on error.

error return:
  • ENOSYS Not supported by this driver.

notes:

Not supported by all drivers.

DVD_READ_STRUCT Read structure

usage:

dvd_struct s;

ioctl(fd, DVD_READ_STRUCT, &s);
inputs:

dvd_struct structure, containing:

type

specifies the information desired, one of DVD_STRUCT_PHYSICAL, DVD_STRUCT_COPYRIGHT, DVD_STRUCT_DISCKEY, DVD_STRUCT_BCA, DVD_STRUCT_MANUFACT

physical.layer_num

desired layer, indexed from 0

copyright.layer_num

desired layer, indexed from 0

disckey.agid

outputs:

dvd_struct structure, containing:

physical

for type == DVD_STRUCT_PHYSICAL

copyright

for type == DVD_STRUCT_COPYRIGHT

disckey.value

for type == DVD_STRUCT_DISCKEY

bca.{len,value}

for type == DVD_STRUCT_BCA

manufact.{len,valu}

for type == DVD_STRUCT_MANUFACT

error returns:
  • EINVAL physical.layer_num exceeds number of layers

  • EIO Received invalid response from drive

DVD_WRITE_STRUCT Write structure

Not implemented, as of 2.6.8.1

DVD_AUTH Authentication

usage:

dvd_authinfo ai;

ioctl(fd, DVD_AUTH, &ai);
inputs:

dvd_authinfo structure. See <linux/cdrom.h>

outputs:

dvd_authinfo structure.

error return:
  • ENOTTY ai.type not recognized.

CDROM_SEND_PACKET

send a packet to the drive

usage:

struct cdrom_generic_command cgc;

ioctl(fd, CDROM_SEND_PACKET, &cgc);
inputs:

cdrom_generic_command structure containing the packet to send.

outputs:

none

cdrom_generic_command structure containing results.

error return:
  • EIO

    command failed.

  • EPERM

    Operation not permitted, either because a write command was attempted on a drive which is opened read-only, or because the command requires CAP_SYS_RAWIO

  • EINVAL

    cgc.data_direction not set

CDROM_NEXT_WRITABLE

get next writable block

usage:

long next;

ioctl(fd, CDROM_NEXT_WRITABLE, &next);
inputs:

none

outputs:

The next writable block.

notes:

If the device does not support this ioctl directly, the

ioctl will return CDROM_LAST_WRITTEN + 7.

CDROM_LAST_WRITTEN

get last block written on disc

usage:

long last;

ioctl(fd, CDROM_LAST_WRITTEN, &last);
inputs:

none

outputs:

The last block written on disc

notes:

If the device does not support this ioctl directly, the result is derived from the disc's table of contents. If the table of contents can't be read, this ioctl returns an error.